Extron medialink software#
Device shall be configured using MLC 55, 62 and 64 Series Configuration software.Device shall be compatible with Flex55 mounting systems.Device shall be able to mount in a standard single gang EU electrical junction box with 60 mm mounting centers with an included adapter frame.Device shall have the ability to be mounted directly in a wall, lectern, or other flat surface.Volume up/Volume down represented by speaker symbols.Device shall ship with an optional six button bezel kit and additional buttons listed below:.Device shall include black face plate that mounts into a 1 gang EU junction box.Device shall be Section 508 Compliant and shall meet or exceed accessibility standards for Electronic Information Technology.Device shall provide audible feedback from the built-in speaker by beeping when a button is pressed.Device shall have a 12-volt captive screw connection located on the back of the panel that will be used to power the panel using an included universal power supply.Device shall have a configurable unidirectional RS-232 port on captive screw connector located on the back of the panel for universal display control.
This port shall allow the transmission of IR signals (using an IR emitter) or unidirectional RS-232 communications for control of AV system components Device shall have one configurable IR/Serial port on captive screw connector located on the back of the controller.Device shall have two normally open low voltage relays on captive screw connectors that can be configured to control lighting, screen control or other device functions.Device shall support one digital input on captive screw connector located on the back of the controller that can be used to interface with devices such as sensors, switches, and relays.Device shall feature a host port on captive screw connectors located on the back of the panel that shall allow for device configuration.Device shall feature a mini female USB B Port that shall be located on the left side of the controller that shall allow for device configuration.IR receiver shall be located on the left side of the controller
Extron medialink drivers#